隔油池和处理设备

Equipment you need to treat trade wastewater\r\n

Trade wastewater contains solids, oil, grease and other substances. If you discharge it directly to the wastewater system (sewer), it can cause blockages and overflows, overload wastewater treatment plants, and pollute our rivers and beaches. That's why you must apply to discharge trade wastewater before you install grease traps and other pre-treatment equipment.

\r\n"}}" id="text-6c0509dd42" class="cmp-text">

用于处理工业废水的设备

工业废水含有固体、油、油脂和其他物质。如果你把污水直接排放到污水系统(下水道),就会造成堵塞和溢出,使污水处理厂超载,污染我们的河流和海滩。因此,在安装隔油池及其他预处理设备前,必须先申请排放工业废水


What do you need to do?\r\n"}}" id="ID01" class="cmp-text">

你需要做什么?

 

\r\n

Commercial customers

\r\n

If you discharge commercial trade wastewater you:

\r\n
    \r\n
  • must have our approval to discharge trade wastewater. Find out more about commercial trade wastewater and how to apply
  • \r\n
  • may be required to install standard items of pre-treatment. See our list of pre-specified, standard equipment for deemed processes under other businesses below
  • \r\n
  • must select the appropriate pre-treatment technology. Retail food and motor trades have particular requirements, which are outlined below
  • \r\n
  • must install only the pre-treatment items that we've listed
  • \r\n
  • must maintain your equipment.
  • \r\n
\r\n"}}" id="ID02" class="cmp-text">

商业客户

如果你排放商业废水,你:

  • 排放工业废水必须得到我们的批准。了解更多有关商业贸易废水以及如何应用
  • 可能需要安装预处理的标准项目。请参阅我们的列表中预先指定的,标准设备的流程下,其他业务
  • 必须选择合适的前处理技术。零售食品和汽车行业有特殊的要求,概述如下
  • 必须只安装我们列出的预处理项目吗
  • 必须维护你的设备。
 

\r\n

Industrial customers

\r\n

If you discharge industrial trade wastewater, you:

\r\n
    \r\n
  • must have our written approval to discharge trade wastewater. Find out more about industrial trade wastewater
  • \r\n
  • must meet our acceptance standards for specific substances found in trade wastewater
  • \r\n
  • must install pre-treatment designed and sized to meet site-specific requirements as set out in your agreement
    \r\n
  • \r\n
  • must maintain your equipment and follow our requirements 
  • \r\n
  • must collect and analyse samples of your trade wastewater as specified in your agreement 
  • \r\n
  • may need to engage a wastewater treatment specialist.
    \r\n
  • \r\n
\r\n"}}" id="ID03" class="cmp-text">

工业客户

如果你排放工业废水,你:

  • 必须有我们的书面批准才能排放工业废水。了解更多有关工业贸易废水
  • 在工业废水中发现的特定物质必须符合我们的验收标准吗
  • 是否必须按照协议中规定的场地特定要求进行预处理设计和尺寸的安装
  • 必须维护您的设备并遵循我们的要求吗
  • 必须按照协议要求收集和分析工业废水样品吗
  • 可能需要聘请一名废水处理专家。

不确定自己是商业客户还是工业客户?
别担心。打电话给我们13 20 92工作日正常工作时间或发邮件businesscustomers@sydneywater.com.au


Choosing the right equipment\r\n"}}" id="ID04" class="cmp-text">

选择合适的装备

If you're discharging commercial trade wastewater, you must install standard items of pre-treatment. The type of pre-treatment required will depend on your business activities and processes. Food and motor trades industries have particular requirements and equipment, but all businesses must meet our conditions to remain connected to the wastewater system.

\r\n"}}" id="text-7620889d4d" class="cmp-text">

如果你正在排放商业贸易废水,你必须安装标准的预处理项目。所需的预处理类型将取决于您的业务活动和流程。必威体育手机APP食品和电机行业有特殊的要求和设备,但所有企业必须满足我们的条件,以保持与废水系统的连接。

Pre-treatment equipment for retail food businesses\r\n

Most retail food businesses only need to install:

\r\n
    \r\n
  • in-sink and in-floor bucket traps
  • \r\n
  • a correctly sized grease trap.
  • \r\n
\r\n

Some processes may need additional pre-treatment, such as upstream grease removal devices or under sink pump units.

\r\n

Read on to learn about grease traps and other treatment equipment for retail food businesses and shopping centres.

\r\n"}}" id="ID05" class="cmp-text">

食品零售企业的预处理设备

大多数食品零售企业只需要安装:

  • 水槽式和地板式桶式疏水阀
  • 大小正确的隔油池。

有些工序可能需要额外的预处理,如上游除脂装置或水槽泵装置。

继续阅读,了解零售食品企业和购物中心的隔油池和其他处理设备。

Our requirements\r\n

To find out about pre-treatment requirements for food businesses, read Plumbing for retail food businesses (450KB)See more information below about requirements for shopping centres.

\r\n
Choose the right equipment
\r\n

Only choose pre-treatment we've listed and size it to meet your maximum hourly flow rate now and into the future. Select from our Listed pre-treatment for food businesses to find out if a product is listed for use within our area of operations and who supplies it. 

\r\n
Install the equipment
\r\n

You must have a licensed plumber install your grease trap according to the manufacturer's instructions and The Plumbing Code of AustraliaIf you manage a shopping centre, you may need multiple grease traps. Read more below.

\r\n
Maintain your equipment
\r\n

You must have a Wastesafe contractor regularly empty and maintain your grease trap. Learn about Wastesafe and select your Wastesafe transporter to empty your grease trap, clean it and maintain it.

\r\n
Manage your wastewater
\r\n

Follow our housekeeping tips to introduce cleaner production methods to reduce the amount of wastewater you produce.

\r\n"}}" id="text-a0dead6106" class="cmp-text">
我们的需求

如欲了解食物业的前处理要求,请阅读零售食品业的管道工程(450KB)关于购物中心的要求,请参阅下面的更多信息。

选择合适的装备

只有选择预处理,我们已经列出和大小,以满足您的最大小时流量现在和未来。从我们的选择上市前处理食品企业了解产品是否在我们的运营区域内使用,以及由谁供应。

安装设备

你必须请有牌照的水管工根据制造商的说明安装隔油池澳大利亚管道规范如果你管理一个购物中心,你可能需要多个隔油器。阅读更多。

保持你的设备

您必须有一个废物安全承包商定期清空和维护您的隔油池。了解废物安全及选择您的废物安全运输工具清空您的隔油池,清洁并维护它。

管理你的废水

跟随我们的管家提示引入清洁生产方法,减少废水的排放量。

Pre-treatment equipment for motor trades businesses\r\n

Most motor trades businesses need to install:

\r\n
    \r\n
  • in-sink and in-floor bucket traps
  • \r\n
  • an oil water separation system with a collection pit and pump.
  • \r\n
\r\n

Only use pre-treatment we've listed and size it to meet your maximum hourly flow rate now and into the future.

\r\n

Read on to learn about oil water separators and treatment equipment for motor trades businesses.

\r\n"}}" id="ID06" class="cmp-text">

汽车行业前处理设备业务

大多数汽车行业需要安装:

  • 水槽式和地板式桶式疏水阀
  • 一种带集水池和泵的油水分离系统。

只使用预处理,我们已经列出和大小,以满足您现在和未来的最大小时流量。

请继续阅读,了解电机行业的油水分离器和处理设备。

Our requirements\r\n

Whether you're a mechanic, run a service station, panel beaters, car detailers or a car wash, you need to follow our requirements to remain connected to the wastewater system.

\r\n

To find out about pre-treatment requirements for your motor trades business, see the table below.

\r\n
Choose the right equipment
\r\n
\r\n

Only choose pre-treatment we've listed and size it to meet your maximum hourly flow rate now and into the future.

\r\n

Read more about requirements for service stations, panel beaters and spray painters, car detailers, mechanics, auto-recyclers and car washes below. 

\r\n

Select from our Listed pre-treatment for automotive businesses to find out if a product is listed for use within our area of operations and who supplies it. 

\r\n
Install the equipment
\r\n

Most motor trades businesses require an oil water separator. Read more about oil water separators and how to install them below.

\r\n
Maintain the equipment
\r\n

You must properly maintain your equipment according to the manufacturer's instructions to ensure you continue to meet our requirements.

\r\n
Manage your wastewater
\r\n

Follow our housekeeping tips to introduce cleaner production methods to reduce the amount of wastewater you produce.

\r\n"}}" id="text-19db02536b" class="cmp-text">
我们的需求

无论您是技工,运营服务站,面板打手,汽车护理师或洗车,您都需要遵循我们的要求,保持与废水处理系统的连接。

如欲了解电机行业的前处理要求,请参阅下表。

选择合适的装备

只有选择预处理,我们已经列出和大小,以满足您的最大小时流量现在和未来。

在下面阅读更多关于服务站、面板打印工、喷漆工、汽车护理工、机械师、汽车回收工和洗车工的要求。

从我们的选择汽车企业上市前处理了解产品是否在我们的运营区域内使用,以及由谁供应。

安装设备

大多数电机行业都需要油水分离器。阅读更多关于油水分离器和如何安装它们下面。

维护设备

您必须根据制造商的说明正确地维护您的设备,以确保您继续满足我们的要求。

管理你的废水

跟随我们的管家提示引入清洁生产方法,减少废水的排放量。

Pre-treatment equipment for other businesses\r\n

There are varied pre-treatment requirements for other businesses. All businesses must meet our requirements to be connected to the wastewater system. 

\r\n

Only use pre-treatment we've listed and size it to meet your maximum hourly flow rate now and into the future.

\r\n

Read on to learn about requirements for deemed customers and other businesses.

\r\n"}}" id="ID07" class="cmp-text">

其他企业的预处理设备

其他企业有不同的预处理要求。所有企业必须符合我们的要求才能接入废水处理系统。

只使用预处理,我们已经列出和大小,以满足您现在和未来的最大小时流量。

继续阅读,了解被视为客户和其他业务的需求。

Our requirements\r\n

To find out about pre-treatment requirements for commercial businesses with deemed processes, see the table below.
\r\n

\r\n

If you're discharging industrial trade wastewater, you may need a specialist to help you design site-specific treatment to meet our acceptance standards before you select from our listed pre-treatment items.

\r\n

To find out more about acceptance standards, read our Industrial customers – Acceptance standards and charging rates (644KB) fact sheet

\r\n

Read more about industrial trade wastewater.

\r\n
Choose the right equipment
\r\n

Select from our Listed pre-treatment for other businesses to find out if a product is listed for use within our area of operations and who supplies it. 

\r\n
Install and maintain the equipment
\r\n

There are many different requirements depending on your business. Follow any installation and maintenance instructions from the manufacturer to ensure your equipment continues to meet our requirements.

\r\n
Manage your wastewater
\r\n

Follow our housekeeping tips to introduce cleaner production methods to reduce the amount of wastewater you produce.

\r\n"}}" id="text-7eaaab6500" class="cmp-text">
我们的需求

如需了解商业企业的前处理要求,请参阅下表。

如果您正在排放工业废水,在您从我们列出的前处理项目中选择之前,您可能需要一位专家来帮助您设计特定地点的处理方案,以满足我们的验收标准。

要了解更多关于验收标准,请阅读我们的工业客户-验收标准和收费标准(644KB)简报

阅读更多关于工业贸易废水

选择合适的装备

从我们的选择其他企业上市前预处理了解产品是否在我们的运营区域内使用,以及由谁供应。

安装和维护设备

根据您的业务,有许多不同的需求。必威体育手机APP遵循制造商的任何安装和维护指导,以确保您的设备继续满足我们的要求。

管理你的废水

跟随我们的管家提示引入清洁生产方法,减少废水的排放量。


Grease traps\r\n

Grease traps are the most common form of pre-treatment for retail food and some other businesses. You need to properly install and maintain your grease trap to continue to meet our requirements. If you reduce the amount of waste you're producing, your grease trap will work better. You must never pour waste oil directly into the sink or you'll quickly overload your grease trap.

\r\n"}}" id="ID08" class="cmp-text">

集油器

隔油池是零售食品和其他一些企业最常见的预处理形式。你必须妥善安装及保养隔油池,才能继续符合我们的要求。如果你能减少你产生的废物,你的隔油器会工作得更好。千万不要把废油直接倒进水槽里,否则隔油池很快就会超载。

 \r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n

What you need to do

\r\n

Why you need to do it

\r\n

Engage a licensed plumber. When the work is complete, ask your plumber for a certificate of compliance.

\r\n

The grease trap must be installed according to the manufacturer's instructions, our requirements and The Plumbing Code of Australia.

\r\n

Size the grease trap to meet your maximum hourly flow now and into the future.

\r\n

An undersized grease trap will not treat your trade wastewater. We may ask you to install additional pre-treatment.

\r\n

Install the grease trap as close to the source (kitchen area) as possible.

\r\n

If you use long pipe runs, they can become clogged with grease. This can cause overflows in your property.

\r\n

Install the grease trap so it drains by gravity to the wastewater system (sewer).

\r\n

Using pumps adds complexity and additional costs. If your pump fails, the grease trap will overflow within your property.

\r\n

Ensure your grease trap is regularly cleaned.

\r\n

Grease traps must be pumped out regularly. Your waste contractor will pump out the contents of the grease trap, clean the internal surfaces and scrape the inside of the grease trap. 
\r\n
\r\nWe'll specify how often your grease trap needs to be pumped out.

\r\n

Ensure adequate space above the grease trap (at least equal to the depth of the grease trap).

\r\n

This allows enough space to open the grease trap lid, maintain it and get it pumped out.

\r\n

Allow for safe and unrestricted access to inspect and service (pump out) the grease trap.

\r\n

Your waste contractor must park the waste tanker close to the grease trap.

\r\n

Our representatives need safe access to check the performance of the grease trap.

\r\n

Consider the need for fixed pump-out lines.

\r\n

Some situations require you to install a fixed pump-out line, such as multi-storey buildings.
\r\n
\r\nA fixed pump-out line runs from outside a building to a point near the grease trap. This enables your waste contractor to connect a vacuum tanker to the fixed pump-out line at street level and use a flexible hose (attached to the other end of the fixed pump-out line) to empty the grease trap.

\r\n
\r\n

 

\r\n

Learn more

\r\n

For more information about grease traps, read:

\r\n\r\n"}}" id="text-ecd19391c1" class="cmp-text">

你需要做什么

你为什么要这么做

雇用有执照的水管工。工程完成后,请水管工出示合格证明。

隔油池必须按照制造商的说明、我们的要求和澳大利亚管道规范

大小的隔油池满足您的最大小时流量现在和未来。

一个小的隔油池不能处理你的工业废水。我们可能会要求你安装额外的预处理设备。

隔油池的安装应尽量靠近源(厨房区域)。

如果你使用长的管道,它们会被油脂堵塞。这可能会导致您的属性溢出。

安装隔油池,使其通过重力排到废水系统(下水道)。

使用泵增加了复杂性和额外的成本。如果您的泵坏了,隔油池就会溢出您的住宅。

确保定期清洁隔油池。

隔油器必须定期泵出。废物处理承办商会抽出隔油池内的废物,清洁隔油池的内部表面,并刮擦隔油池的内部。

我们会详细说明隔油池需要多久抽一次油。

确保隔油池上方有足够的空间(至少等于隔油池的深度)。

这允许足够的空间来打开隔油池的盖子,维护它,并让它泵出。

允许安全、不受限制地检查和维修隔油池(泵出)。

你的废物承建商必须把废物车停在隔油池附近。

我们的代表需要安全的通道检查隔油池的性能。

考虑固定泵出管线的需要。

有些情况需要你安装固定的泵出线路,如多层建筑。

一条固定的抽油管线从建筑物外面延伸到隔油池附近。这样,废物承办商便可将一辆真空罐车连接至街道上的固定抽油管道,并使用一根软管(连接在固定抽油管道的另一端)排空隔油池。

了解更多

有关隔油池的更多信息,请阅读:

Under-sink泵单位
最好是让隔油池靠重力排到下水道。这导致较少的操作问题,但有时这是不可能的。如果下水道等级不允许重力连接,首选的设计是通过隔油池排放到泵井,然后泵到下水道。最不可取的设计是泵入隔油池。想要了解更多,请阅读我们的隔油池-水槽泵组下的隔油池(276KB)简报。


Pre-treatment requirements for shopping centres\r\n

Grease trap requirements for shopping centres depend on the size of the complex and how much greasy waste they produce. If you manage a shopping complex or small shopping centre, you may need to install multiple grease traps.

\r\n

Communal grease traps must have the capacity to process the combined greasy waste output of each retail food outlet. You may need to allow extra capacity to allow for future changes.

\r\n

There are different requirements depending on the size of your grease trap and you may need to install additional treatment equipment.

\r\n

 

\r\n"}}" id="ID09" class="cmp-text">

购物中心的预处理要求

商场对隔油池的要求,视乎商场的规模及产生多少油腻废物而定。如果你管理一个购物中心或小型购物中心,你可能需要安装多个隔油池。

公用隔油池必须有能力处理每个零售食品店输出的油腻废物。您可能需要允许额外的容量来允许将来的更改。

隔油池有不同的要求,视乎隔油池的大小而定,你可能需要安装额外的处理设备。

Small complexes\r\n

For small complexes (that require less than 30,000 L total grease trap capacity), you may use communal grease traps. The maximum capacity for a grease trap is 5,000 L.

\r\n

You need separate grease traps for grouped businesses to ensure you don't exceed the limit. You can also install centralised pre-treatment equipment, such as dissolved air flotation or equivalent.

\r\n

Large complexes

\r\n

For large complexes (those with over 30,000 L total grease trap capacity), you must have centralised pre-treatment, such as dissolved air flotation or the equivalent. Where exceptional circumstances prevent you installing a centralised pre-treatment system, we'll work with you and may approve alternative pre-treatment.

\r\n"}}" id="text-6dec01b87d" class="cmp-text">

小复合物

对于小型设施(总隔油池容量不足30,000公升),可使用公用隔油池。隔油池的最大容量为5,000升。

您需要单独的隔油池为分组企业,以确保您不超过限制。您也可以安装集中的预处理设备,如溶解气浮选或同等设备。

大的复合体

对于大型的隔油池(总容量超过30,000公升),你必须进行集中的预处理,例如溶解气浮或类似的处理。在特殊情况下,如果您无法安装中央预处理系统,我们将与您合作,并可能批准替代预处理。


Pre-treatment requirements for motor trades
\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n

Activities

\r\n

Minimum pre-treatment requirements

\r\n

Service station with under canopy forecourt

\r\n

Collection well with a sloped bottom and minimum working volume of 750 L

\r\n
    \r\n
  • Inspection opening on grill cover
  • \r\n
  • Level indicator in collection well
  • \r\n
  • High level in collection well triggers flashing light
  • \r\n
  • Manual check of collection well before using keyed manual start switch
  • \r\n
  • Keyed manual start switch located close to pit and pump
  • \r\n
\r\n

Oil water separator system
\r\n

\r\n

Bunded area around oil water separator
\r\n

\r\n

Wastewater discharge point located outside the bunded area 

\r\n

Installation set-up with hydrocyclone
\r\n
\r\nInstallation set-up with coalescing plate separator

\r\n

Panel beating and spray painting
\r\nCar detailer
\r\nMechanical workshop
\r\nAuto recycler

\r\n

Collection pit with an operating capacity of at least 500 L

\r\n

Oil water separator system sized according to influent flow rate (minimum size 1 kL/hr)

\r\n

Installation set-up with coalescing plate separator

\r\n

Car wash – hand wash and pressure spray
\r\nCar wash – mechanical <12 kL/day

\r\n

Roof and bund wash area to exclude rainwater and install in-floor bucket traps

\r\n

Collection pit with an operating capacity of at least 500 L
\r\n

\r\n

Oil water separator system sized according to influent flow rate (minimum size 1 kL/hour)
\r\n

\r\n

No discharge of solvents to sewer

\r\n
\r\n"}}" id="ID10" class="cmp-text">

电机行业的预处理要求

活动

最低预处理要求

服务站与雨棚下前院

底部倾斜的收集井,最小工作容积为750升

  • 检查烤架盖开口
  • 液位指示器在收集中
  • 高水平的采集孔触发闪光灯
  • 在使用键控手动启动开关前,应先进行手动检查
  • 键控手动启动开关,位于坑和泵附近

油水分离器系统

油水分离器周围的粘结区

污水排放点位于堤防区域外

水力旋流器的安装安装

安装安装有聚结板分离器

面板敲打和喷涂
汽车推销员
机修车间
汽车的回收商

具有至少500升运行能力的收集池

油水分离器系统根据进水流量进行分级(最小尺寸为1kl /hr)

安装安装有聚结板分离器

洗车-手洗-加压喷雾
洗车-机械< 12kl /天

屋顶和外滩洗涤区以排除雨水,并在地板上安装桶式疏水器

具有至少500升运行能力的收集池

油水分离器系统根据进水流量进行分级(最小尺寸1kl /h)

不向下水道排放溶剂


 \r\n

Pre-treatment requirements for service stations 

\r\n

We have specific installation requirements for service stations with under-canopy forecourts. 

\r\n

See our schematic diagrams for:

\r\n\r\n"}}" id="ID11" class="cmp-text">

服务站的预处理要求

我们对服务站有特殊的安装要求,服务站有雨棚下的前院。

请看我们的示意图:


Oil water separators\r\n

Oil water separators remove free oil from wastewater. Read more about the different types of oil water separator technologies below.

\r\n

Before choosing your oil water separator system, read about listed pre-treatment for the auto industry
\r\n

\r\n

Installation
\r\n

\r\n

Before installing your oil water separator:

\r\n\r\n

It must be installed according to:

\r\n\r\n"}}" id="ID12" class="cmp-text">

油水分离器

油水分离器可以去除废水中的游离油。阅读以下不同类型的油水分离器技术。

在选择油水分离器系统之前,阅读以下内容上市前处理汽车行业

安装

在安装油水分离器之前:

安装时必须遵循:

Types of oil water separator technologies\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n

Type of technology
\r\n

\r\n

How it works

\r\n

Coalescing plate separator

\r\n

This is a gravity separator with a plate pack fitted to remove oils and solids. It uses the difference in specific gravity (settling speed) between unmixable components of a liquid waste stream, such as engine oil and washwater.

\r\n

The plates improve the gravity separation process by reducing the settling or rise distance. Wastewater is collected and pumped to the coalescing plate separator.

\r\n

Vertical gravity separator

\r\n

This oil water separator uses a vertical cylinder design containing a continuous truncated conical spiral pack to separate non-emulsified oils and sludges from wastewater. 

\r\n

Wastewater is collected in a pit and pumped to the vertical gravity separator. 

\r\n

Hydrocyclone separator system

\r\n

This uses centrifugal force to separate oils from water.

\r\n
\r\n"}}" id="text-f55ebf796d" class="cmp-text">

油水分离器技术类型

类型的技术

它是如何工作的

聚结板分离器

这是一个重力分离器,配有一个平板包,用于去除油和固体。它利用了废液流中不可混合组分(如机油和洗涤水)的比重(沉降速度)差异。

通过减少沉降或上升距离,这些板改善了重力分选过程。废水被收集并泵入聚结板分离器。

垂直重力分离器

该油水分离器采用立式圆筒设计,其中包含一个连续截断的锥形螺旋填料,用于从废水中分离非乳化油和污泥。

废水被收集在一个坑里,然后泵入垂直重力分离器。

水力旋流器分选机系统

它利用离心力将油从水中分离出来。


Requirements for deemed processes \r\n"}}" id="ID13" class="cmp-text">

被视为过程的要求

Some businesses are deemed to have permission to discharge trade wastewater to our wastewater systems. We call these 'deemed processes'. You must still meet the requirements listed below or you could be disconnected. Deemed processes do not attract trade waste fees and charges.

\r\n

If you're not certain whether your business has 'deemed processes', apply for approval to discharge and we'll advise you.

\r\n

 

\r\n"}}" id="ID13" class="cmp-text">

有些企业被视为已获许可向我们的废水系统排放工业废水。我们称之为“被认为的过程”。您仍然必须满足下面列出的要求,否则可能会断开连接。被认定的流程不收取贸易废物费和其他费用。

如果您不确定您的业务是否具有“被视为的流程”,请申请批准解除必威体育手机APP,我们会建议您。

Deemed processes and their pre-treatment requirements\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n\r\n

Deemed process

\r\n

Pre-treatment requirements

\r\n

Beautician, doctor's surgery, funeral parlour, school (ceramic and pottery room), venetian blind cleaning

\r\n

No pre-treatment required

\r\n

Aquariums

\r\n

Must meet Australian quarantine requirements

\r\n

Building construction – slab formation

\r\n

No discharge to our wastewater system (sewer)

\r\n

Pipework with open connectors to be capped at all times or have an internal device fitted

\r\n

Mobile carpet cleaners

\r\n

20 micron filter unit

\r\n

Cooling towers

\r\n

Discharge not to exceed 500 L/day 

\r\n

Dental surgery

\r\n

Amalgam trap and segregation of waste amalgam

\r\n

Dental technician

\r\n

Plaster trap

\r\n

Dog groomer, pet shop (retail)

\r\n

In-floor bucket trap, no organophosphates pesticides to our wastewater system (sewer)

\r\n

Dry cleaners

\r\n

Solvent recovery unit

\r\n

Florist

\r\n

No herbicide to our wastewater system (sewer)

\r\n

Hairdresser

\r\n

In-floor bucket trap and in-sink bucket trap

\r\n

Optical lens grinding

\r\n

Solids settlement pit

\r\n

Residential garbage bin-wash area

\r\n

Roof and bund bin-wash area to exclude rainwater and install an approved in-floor bucket trap

\r\n

Discharge directly to the wastewater system (sewer) via floor waste

\r\n

Use only soap-based products to clean garbage bins

\r\n

or

\r\n

Bund bin-wash area to exclude run-off from other areas and install approved diversion system*

\r\n

Use only soap-based products to clean garbage bins

\r\n

* Fox Environmental Systems DD600S

\r\n

Residential vehicle wash bay

\r\n

Minimum 1,000 L/hour oil water separator system or 1,000 L general purpose pit

\r\n

Display a sign stating 'No degreasing or mechanical work in the wash bay'

\r\n

Locate vehicle wash bay on a roofed and bunded hard surface and install an approved in-floor bucket trap

\r\n

Direct all washwater to the oil water separator or general purpose pit via floor waste with an approved in-floor bucket trap

\r\n

Sanitary bin washing

\r\n

Screening and temperature control (less than 38° C)

\r\n

Swimming pool (residential, hotel, hospital, club)

\r\n

No open areas discharging rainwater to our wastewater system (sewer)

\r\n

Train platform and internal carriage cleaning

\r\n

In-floor bucket trap and in-sink bucket trap

\r\n

No open areas draining to the wastewater system (sewer)

\r\n

Wash water generated by the washing of painting and plastering equipment such as brushes, trays and spatulas (construction site only – medium to high-density developments, mixed developments, commercial and industrial developments)

\r\n

Minimum 1,000 L general-purpose pit or solid settlement pit

\r\n

Note: We must authorise all pre-treatment apparatus

\r\n
\r\n

 

\r\n

Not sure whether your business processes are deemed processes?

\r\n

If you're discharging trade wastewater and you're not listed as a deemed process, you must have our written approval. If you can't find it or you're not sure if you have our written approval, email businesscustomers@sydneywater.com.au.
\r\n
\r\nIf you don't have written approval and you're discharging trade waste, you must apply at Sydney Water Tap in.

\r\n"}}" id="text-6031add5ad" class="cmp-text">

被认为的过程及其前处理要求

认为过程

预处理要求

美容师,医生手术室,殡仪馆,学校(陶瓷和陶艺室),百叶窗清洁

不需要预处理

水族馆

必须符合澳大利亚的检疫要求

建筑结构。板的形成

不会排放到污水系统(污水渠)

带有开口连接器的管道在任何时候都要封顶或安装内部设备

移动地毯清洁剂

20微米过滤单元

冷却塔

流量不超过500升/天

牙科手术

汞齐捕集器及废汞齐的分离

牙科技师

石膏的陷阱

狗美容院、宠物店(零售)

地板式桶式捕集器,废水处理系统(下水道)不含有机磷农药

干洗店

溶剂回收装置

花店

污水处理系统(下水道)不使用除草剂

理发师

底式桶形疏水阀和沉式桶形疏水阀

光学透镜研磨

固体沉降坑

住宅垃圾桶清洗区

屋顶和外滩垃圾桶清洗区,以排除雨水,并安装经批准的地板内桶式疏水阀

通过地面垃圾直接排放到污水系统(下水道)

只使用肥皂类产品清洁垃圾桶

外滩垃圾桶清洗区域,排除其他区域的径流,并安装经批准的导流系统*

只使用肥皂类产品清洁垃圾桶

* Fox环境系统DD600S

住宅车辆冲刷区

至少1000升/小时油水分离器系统或1000升通用井

摆放“洗水区禁止除油或进行机械工作”的标志

将车辆清洗槽定位在有屋顶和绑扎的坚硬表面上,并安装经批准的地板内桶式疏水阀

使用经认可的地板内桶式疏水阀,将所有的冲洗水通过地板废弃物直接输送到油水分离器或通用池中

卫生本洗

筛选及温度控制(小于38°C)

游泳池(住宅、酒店、医院、会所)

没有露天地方将雨水排入污水系统(污水渠)

列车月台及车厢内部清洁

底式桶形疏水阀和沉式桶形疏水阀

无露天地方排入污水系统(下水道)

清洗油漆和抹灰设备(如刷子、托盘和抹刀)所产生的洗涤水(只适用于建筑地盘-中等至高密度发展、混合发展、商业和工业发展)

至少1000 L的通用坑或固体沉降坑

注意:我们必须批准所有预处理设备

不确定您的业务流程是否被视为流程?必威体育手机APP

如果您正在排放工业废水,而您没有被列为一个被视为的过程,您必须得到我们的书面批准。如果你找不到,或者你不确定是否有我们的书面批准,发邮件businesscustomers@sydneywater.com.au

如果你没有书面批准,而你正在排放贸易废物,你必须在悉尼水龙头进水


Listed pre-treatment equipment and suppliers\r\n"}}" id="ID14" class="cmp-text">

列出前处理设备和供应商

如何将你的预处理设备列出来
如果您生产或供应预处理设备,并希望在我们的操作区域内使用某个项目,请发送电子邮件至twproductapproval@sydneywater.com.au


Baidu
map